Desktop Ozone Analyzer
Desktop Ozone Analyzer

Product Overview:

Product overview: HYP600 gas analyzer is an intelligent high-performance analytical instrument that mainly uses the non-spectral infrared (NDIR) measurement principle to continuously monitor various component gases on-line.The analyzer is equipped with a 5-inch touch TFT-LCD large color LCD control screen, the overall menu structure is reasonably distributed, easy-to-understand UI color icon menu, intuitive and friendly user operation touch interface, all status display, measurement value and alarm value as well as simulation and Available digitally.Standard 19-inch chassis, rack-mounted, desktop, wall-mounted optional, built-in filter and regulating valve without disassembly and replacement on site, perfect for online monitoring of industrial sites and laboratories 24 hours a day.
Parameters: The analyzer is equipped with a large 5-inch touch TFT-LCD color LCD control screen, which is easy and convenient to operate;
Parameters: Built-in temperature and humidity sensor, real-time display of ambient temperature and humidity;
Parameters: The built-in filter and regulating valve do not need to be disassembled and replaced on site, suitable for 24-hour industrial on-site monitoring;
Parameters: standard 19-inch chassis, rack-mounted, desktop, wall-mounted optional, suitable for various industrial field monitoring;
Parameters: Detailed measurement data display, measurement value, concentration unit, ambient temperature, humidity, maximum and minimum values are clearly presented;
Product characteristics and parameters ▼

Main features:
intelligent temperature and humidity and zero point compensation algorithm, full software automatic calibration function for target points from level 2 to level 3 or above, to ensure the accuracy of measurement results; automatically detect the working status of each sensor and components when starting up;
support PPM and mg /m3, %VOL and mg/L concentration units can be switched freely;
real-time data transmission, local and remote wireless alarm notifications can be issued accurately in a variety of alarm methods (optional);
automatic layout according to the number of sensors; automatic storage, manual storage, single Point storage, a variety of storage methods are available; the storage interval can be customized, and it can store 300,000 sets of data with date and time marks. If a micro SD memory card is selected, it can store more than 10 million sets;
short-distance wireless transmission Or the GPRS wireless transmission method with unlimited distance anywhere can transmit real-time detection data and alarm status to the safety center through the built-in wireless module function (optional);
support USB and RS232 serial port measurement data download; support miniature portable printer serial port Print.
Application fields :
1. It is used for environmental protection monitoring such as air and pollution source emissions;
2. Used in industrial process control of petroleum, chemical industry, power station, etc.;
3. Used in fields such as agriculture, medical care and health and scientific research experiments;
4. Determination of gas content in various combustion tests of garbage incineration and landfill
5. For air monitoring in public places;

Features:

product name

Desktop Ozone Gas Analyzer

Product number

HYP600-O3

Gas detection

Ozone (O3)

Detection principle

Principles of Electrochemistry

Measuring range

0-1ppm, 50ppm, 100ppm, 200ppm, 500ppm, 1000ppm, 2000ppm, 5000ppm, 10000ppm, 20000ppm, 40000ppm optional

resolution

0.1ppm

installation method

①Desktop, rack type; ②Wall-mounted installation, with mounting bracket

Indication error

≤±1%FS

repeatability

≤±1%

zero drift

≤±1% (FS/year)

Response time

≤25 seconds (T90), (higher requirements based on sensor performance)

Recovery Time

≤30 seconds (higher requirements based on sensor performance)

Preheat time

More than 120 seconds (according to different sensor configurations)

Power supply

220VAC +10%, -15%; 50Hz ±5Hz

fuse

Rated current: 10A Size: 5mm*20mm

Intake flow

(0.5-0.8) L/min (flow fluctuation ≤ 0.02L/min)

Environmental pressure

86kPa~106kPa

ambient temperature

-20°C~+55°C (typical value) -40°C~+70°C (limit value)

(A pre-processing system can be purchased for higher temperature and humidity requirements—FIX3200 gas online monitoring central processing system)

ambient humidity

10%~95%RH (no condensation)

The main material

SPCC+ aluminum profile

output signal

① Three-wire 4-20mA current signal output, which can be connected to various alarm controllers, PLC, DCS and other control systems

②RS-485 digital signal output, connect RS232 transfer card to view stored data on the computer

③2 groups of relay high and low section alarm switch output: passive contact, capacity 30V 1A, 125VAC 0.5A

④Voltage signal output: 0-5V, 0-10V signal output can be set by yourself (optional)

Signal transmission method

① Three-core (four-core) shielded cable transmission: the longest transmission distance is 1000 meters to 2000 meters (single core 1 square shielded cable)

②Network port TCP/IP transmission: support TCP/IP protocol, can be transmitted within 90 meters by network cable, long-distance real-time transmission through networking (optional)

③ Optical fiber transmission: the longest transmission distance is 20 kilometers to 40 kilometers (single-mode multi-core optical cable transmission, must be equipped with optical fiber MODEM), can be networked (optional)

④Short-distance RTU433 wireless transmission: the transmission distance is 0 to 2 kilometers, depending on the transmission power and the site environment (optional)

⑤GPRS wireless transmission: no distance limit, built-in module, through mobile, China Unicom or telecom signal transmission, with SMS reminder notification function (optional)

Alarm method

External sound and light alarm can be installed, alarm sound: < 90 decibels

Alarm point setting

A1 alarm value, A2 alarm value; TWA alarm value, STEL alarm value can be set separately

display screen

5-inch TFT touch TFT-LCD color LCD screen, 800x480 dot matrix LCD

Operation method

5-inch LCD touch screen touch operation + button auxiliary operation

button

Main interface+lock screen+reset`

backlight

Manual, automatic when alarm

direct reading

Measured value, ambient temperature and humidity, date and time, maximum value, minimum value

data record

Automatic, manual, single-point storage, 1-6 sensor storage intervals can be customized, can continuously store 300,000 sets of data with date and time, optional micro SD memory card, can store more than 10 million sets of data

data download

Support USB and RS232 serial port measurement data download

data printing

Support miniature portable printer serial port printing (optional)

calibration

2-level to 3-level target point full software calibration function, calibration calibration value can be set, one-key zero adjustment

Calibration standard gas requirements

Zero standard gas: 99.999% N2 (nitrogen);

Full scale calibration gas: 85%-110% of the full scale of the measured gas;

Calibration gas at the third point: 35%-75% of the full scale of the measured gas;

Explosion-proof grade

Ex ia ⅡC T4 Gb (intrinsically safe)

degree of protection

IP42

operating mode

Two operating modes, user mode and administrator mode, are available

size

Standard 19-inch chassis, width 480mm × depth 310mm × height 130mm   

weight

About 7Kg

Executive standard

GB15322.1-2003, GB3836.1-2010, GB3836.2-2010, GB3836.4-2010

quality assurance

One year warranty period, free maintenance during the warranty period.