Taizhou Hanyao Electronic Technology Co., Ltd

Benchtop chlorine dioxide gas analyzer

Product Overview：

Product Overview: HYP600 Gas Analyzer is an intelligent high-performance analytical instrument that mainly adopts the non-spectroscopic infrared (NDIR) measurement principle to continuously monitor a variety of component gases. The analyzer is equipped with a 5-inch touch TFT-LCD large color LCD control screen, the overall menu structure is distributed reasonably, the simple and easy-to-understand UI color icon menu, intuitive and friendly user operation touch interface, all status display, measured value and alarm value are provided in analog and digital mode. Standard 19-inch chassis, rack-mounted, desktop-mounted, wall-mounted, built-in filters and regulating valves without disassembly and replacement, perfect for on-line monitoring in industrial sites and laboratories 24 hours a day.

Parameters: ◆The analyzer is equipped with a large 5-inch touch TFT-LCD color LCD control screen, which is simple and convenient to operate;

Parameters: ◆ Embedded 32-bit ultra-low-power microprocessor, small detection error and high resolution;

Parameters: ◆ Built-in filter and regulating valve without disassembly and replacement on site, suitable for 24-hour industrial on-site online monitoring;

Parameters: ◆ Detailed measurement data display, measured value, concentration unit, ambient temperature, humidity, maximum value, minimum value are clearly presented;

Parameters: ◆Standard 19-inch chassis, rack type, desktop type, wall-mounted arbitrary choice, suitable for various industrial site monitoring;

Previous product Return list Next product Contact us

Product characteristics and parameters ▼

Features:

Main features:
◆ Built-in temperature and humidity sensor, real-time display of ambient temperature and humidity;
◆ Intelligent temperature and humidity and zero point compensation algorithm, full software automatic calibration function for target points from level 2 to level 3, to ensure the accuracy of measurement results; automatic detection when starting up The working status of each sensor and components;

◆Support PPM and mg/m3, % VOL and mg/L concentration unit free switching;

◆Automatic layout according to the number of sensors; automatic storage, manual storage, single point storage, multiple storage methods to choose from; storage interval can be customized, can store 300,000 sets of data with date and time marks, such as optional micro SD Memory card, which can store more than 10 million groups;

◆Short-distance wireless transmission or GPRS wireless transmission with unlimited distance anywhere can transmit real-time detection data and alarm status to the safety center through the built-in wireless module function (optional ) ;

◆ Support USB and RS232 serial port mode measurement data download; support miniature portable printer serial port printing.

Application fields:

1. It is used for environmental protection monitoring such as air and pollution source emissions;

2. Used in industrial process control of petroleum, chemical industry, power station, etc.;

3. Used in fields such as agriculture, medical care and health and scientific research experiments;

4. Determination of gas content in various combustion tests of garbage incineration and landfill ;

5.For air monitoring in public places;

Product parameters:

product name	Desktop Chlorine Dioxide Gas Analyzer
Product number	HYP600-CLO2
Gas detection	Chlorine dioxide (CLO2)
Detection principle	Principles of Electrochemistry
Measuring range	0～1ppm, 0～10ppm, 0～50ppm, 0～100ppm, 0～200ppm optional
resolution	0.001ppm (0~1ppm); 0.01ppm (0~100ppm); 0.1ppm (0~200ppm)
installation method	①Desktop, rack type; ②Wall-mounted installation, with mounting bracket
Indication error	≤±3% FS (higher accuracy requirements based on sensor performance)
repeatability	≤±1%
zero drift	≤±1% (FS/year)
Response time	≤25 seconds (T90), (higher requirements based on sensor performance)
Recovery Time	≤30 seconds (higher requirements based on sensor performance)
Preheat time	More than 120 seconds (according to different sensor configurations)
Power supply	220VAC +10%, -15%; 50Hz ±5Hz
fuse	Rated current: 10A Size: 5mm*20mm
Intake flow	(0.5-0.8) L/min (flow fluctuation ≤ 0.02L/min)
Environmental pressure	86kPa～106kPa
ambient temperature	-20°C～+55°C (typical value) -40°C～+70°C (limit value) (Preprocessing system can be purchased for higher temperature and humidity requirements—FIX3200 gas online monitoring central processing system)
environment humidity	10%～95%RH (no condensation)
The main material	SPCC+ aluminum profile
output signal	①Three-wire 4-20mA current signal output, can be connected to various alarm controllers, PLC, DCS and other control systems ②RS-485 digital signal output, connected to RS232 adapter card to view stored data on the computer ③2 groups of high and low relay relays Alarm switch output: passive contact, capacity 30V 1A, 125VAC 0.5A ④Voltage signal output: 0-5V, 0-10V signal output can be set by yourself (optional)
Signal transmission method	①Three-core (four-core) shielded cable transmission: the farthest transmission distance is 1000 meters to 2000 meters (single core 1 square shielded cable) ②Network port TCP/IP transmission: supports TCP/IP protocol, can be transmitted within 90 meters by network cable, through the group Network long-distance real-time transmission (optional) ③Optical fiber transmission: the longest transmission can be 20 kilometers to 40 kilometers (optical cable single-mode multi-core transmission, must be equipped with optical fiber MODEM), can be networked (optional) ④Short-distance RTU433 wireless transmission : The transmission distance is 0 to 2 kilometers, depending on the transmission power and the site environment (optional) ⑤GPRS wireless transmission: no distance limit, built-in module, transmitted through mobile, China Unicom or telecom signals, with SMS reminder notification function (optional)
Alarm method	External sound and light alarm can be installed, alarm sound: < 90 decibels
Alarm point setting	A1 alarm value, A2 alarm value; TWA alarm value, STEL alarm value can be set separately
display screen	5-inch TFT touch TFT-LCD color LCD screen, 800x480 dot matrix LCD
Operation method	5-inch LCD touch screen touch operation + button auxiliary operation
button	Main interface+lock screen+reset`
backlight	Manual, automatic when alarm
direct reading	Measured value, ambient temperature and humidity, date and time, maximum value, minimum value
data record	Automatic, manual, single-point storage, 1-6 sensor storage intervals can be customized, can continuously store 300,000 sets of data with date and time, optional micro SD memory card, can store more than 10 million sets of data
data download	Support USB and RS232 serial port measurement data download
data printing	Support miniature portable printer serial port printing (optional)
calibration	2-level to 3-level target point full software calibration function, calibration calibration value can be set, one-key zero adjustment
Calibration standard gas requirements	Zero-point standard gas: 99.999% N2 (nitrogen); full-scale calibration gas: 85%-110% of the full scale of the measured gas; third-point calibration gas: 35%-75% of the full scale of the measured gas;
Explosion-proof grade	Ex ia ⅡC T4 Ga (intrinsically safe)
degree of protection	IP42
operating mode	Two operating modes, user mode and administrator mode, are available
size	Standard 19-inch chassis, width 480mm × depth 310mm × height 130mm
weight	About 7Kg
Executive standard	GB15322.1-2003, GB3836.1-2010, GB3836.2-2010, GB3836.4-2010
quality assurance	One year warranty period, free maintenance during the warranty period.

Common gases

Product Overview：