Pump suction methane analyzer
Pump suction methane analyzer

Product Overview:

Product overview: The pump-suction gas analyzer is an intelligent high-performance analysis and detection instrument that can continuously monitor the measured gas and has the function of people falling alarm.The optional wireless function of the instrument allows security personnel to obtain real-time instrument data and alarm status from anywhere.Intuitive data display, super large 3.2-inch full-color high-definition large screen, faster response speed, and military-quality shell design raise the safety protection of workers to a whole new level.
Parameters: ◆ Active pump suction type, short response time, embedded 32-bit ultra-low power consumption microprocessor, small detection error and high resolution
Parameters: ◆ Built-in temperature and humidity sensor, real-time display of ambient temperature and humidity;
Parameters: ◆ High-performance intelligent sensor, with a service life of more than 2-3 years;
Parameters: ◆ Support free switching between PPM and mg/m3, %VOL and mg/L concentration units, and free switching between Chinese and English operation interfaces;
Parameters: ◆ Support USB and RS232 serial port measurement data download, support miniature portable printer serial port or Bluetooth wireless printing (optional).
Product characteristics and parameters ▼

Product features :
◆ Intelligent temperature and humidity and zero point compensation algorithm, full software automatic calibration function for target points from level 2 to level 4 to ensure the accuracy of measurement results; automatically detect the working status of each sensor and components when starting up;
◆3.2 inches Full-color super large display screen, large and clear background light can display measurement information under any lighting conditions, easy-to-understand UI color icon menu, friendly user interface with 7-key navigation, showing the humanization and internationalization of the design;
◆ The standard configuration is a large-capacity 11,000 mAh lithium battery, and the continuous working time of a single gas is more than 32 hours; it supports mobile power supply and charging, and is compatible with universal USB port mobile phone chargers;
◆ Combination of engineering plastics and high-strength wear-resistant aluminum Shell, military-quality quality assurance; reasonable and scientific gas path and gas chamber design, try to prevent the sensor from being disturbed by the environment; protection level IP66;
◆Automatically store data, the storage interval can be customized, and can store 300,000 sets of data with date and time marks Data, such as (optional) miniature TF memory card, can store more than 5 million groups;
◆ The short-distance RTU433 wireless transmission method or the GPRS wireless transmission method with unlimited distance anywhere can pass the real-time detection data through the built-in wireless module function and alarm status to the safety center (optional);

Product parameters:

Gas detection

Methane (CH4) in the air

Detection principle

Infrared principle

Measuring range

0-2%Vol, 5%Vol, 50%Vol, 100%Vol optional

resolution

0.01%Vol (0-100%Vol)

Sampling method

Active pumping type, the built-in air pump can be opened or closed independently, the flow rate is 500mL/min

Indication error

≤±3% FS (higher accuracy requirements based on sensor performance)

repeatability

≤±1%

zero drift

≤±1% (FS/year)

Response time

≤20 seconds (T90)

Recovery Time

≤20 seconds

size

Length 270mm × height 193mm × width 106mm

shell material

Engineering plastic + 304 stainless steel + high-strength wear-resistant and corrosion-resistant aluminum alloy

weight

2.1kg

Battery

Super large capacity rechargeable lithium battery 11000mAh, single gas working time is more than 32 hours, six-in-one gas working time is more than 24 hours, charging time is less than 9 hours), support mobile power supply and charging

charger

Square port USB charger, compatible with universal USB port mobile phone chargers

Alarm method

Sound alarm 95 dB@30cm, red LED alarm light, personnel fall alarm; short-distance wireless and long-distance GPRS wireless alarm mode (optional)

show

3.2-inch TFT high-definition large color screen

button

7-key navigation key

direct reading

Measured value, data recording status, pump working status, maximum value, minimum value, average value;
built-in temperature and humidity sensor, real-time display of ambient temperature and humidity

data record

Automatically store data, the storage interval can be customized, can continuously store 300,000 sets of data with date and time, optional micro TF memory card, can store more than 5 million sets

data transmission

Support USB and RS232 serial port measurement data download and transmission, support GPRS wireless transmission or short-distance RTU433 wireless transmission (optional)

data printing

Support miniature portable printer serial port or bluetooth wireless printing (optional)

calibration

Target point calibration function from level 2 to level 4 or above, calibration calibration value can be set, one-key zero adjustment

Explosion-proof grade

ExdⅡCT4 Gb (intrinsically safe)

degree of protection

IP66 (waterproof and dustproof)

operating mode

Two operating modes, user mode and administrator mode, are available

Environmental pressure

86kPa~106kPa

ambient temperature

-20°C~+55°C (typical value) -40°C~+70°C (limit value)
(Higher temperature and humidity requirements can be equipped with a high temperature sampling handle to detect gases with a temperature up to about 800°C)

environment humidity

10%~95%RH (no condensation)

Executive standard

GB 12358-2006, GB 3836.1-2010, GB 3836.4-2010

quality assurance

One year warranty period, free maintenance during the warranty period.