Taizhou Hanyao Electronic Technology Co., Ltd

Online Sulfuryl Fluoride Gas Detector

Product Overview：

Product overview: Hanyao electronic online gas detector adopts imported intelligent gas sensor, which is an intelligent high-performance detection instrument that can continuously monitor sulfuryl fluoride gas online.The overall flameproof structure of the detector has high sensitivity and precision.The detector can realize real-time concentration display on the computer through the gas alarm controller and monitoring management software, and can also transmit real-time monitoring data and alarm status to the safety control center through the optional wireless module.It can be widely used in petroleum and petrochemical, metallurgy, environmental protection, gas, fire protection, municipal, chemical, shipbuilding, electric power, process control, sewage treatment, emergency rescue monitoring and other industries.

Parameters: ◆ Originally imported high-performance sulfuryl fluoride gas sensor, with a service life of more than 2-3 years;

Parameters: ◆ Embedded 32-bit ultra-low power consumption microprocessor, short response time, small detection error and high resolution;

Parameters: ◆ Equipped with an infrared remote control, the menu operation can be performed through the remote control, which can realize the operation without opening the cover in dangerous places;

Parameters: ◆ Intelligent temperature and humidity and zero point compensation algorithm, full software automatic calibration function for target points from level 2 to level 4 to ensure the accuracy of measurement results; automatically detect the working status of each sensor and components when starting up;

Parameters: ◆ 2.3-inch full-color display screen, large and clear background light can display measurement information under any lighting conditions; easy-to-understand UI color icon menu, friendly user interface with 4-key navigation, showing the humanization of the design ,globalization;

Previous product Return list Next product Contact us

Product characteristics and parameters ▼

Features:

◆ Support free switch between PPM and mg/m3, %VOL and mg/L concentration units, and support free switch between Chinese and English operation interfaces;

◆ Real-time data transmission, can accurately issue local and remote wireless alarm notifications in various alarm modes (optional);

◆ The gas chamber is made of military-quality high-strength aluminum profile, which is wear-resistant and corrosion-resistant, and is suitable for complex and harsh industrial environments. The reasonable and scientific design of the gas chamber ensures the accuracy of real-time sensor monitoring;

◆ Automatic storage, the storage interval can be customized, and can store 300,000 sets of data with date and time marks. If the TF memory card is selected, it can store more than 10 million sets;

◆ The short-distance RTU wireless transmission method or the GPRS wireless transmission method with unlimited distance anywhere can transmit real-time detection data and alarm status to the safety center through the built-in wireless module function (optional);

◆ The explosion-proof grade is Exd II CT6, certified by the National Explosion-proof Electrical Inspection Center .

Product parameters:

product name	Online Sulfuryl Fluoride Gas Detector
Product number	AGP800-SO2F2
Gas detection	Sulfuryl fluoride gas (SO2F2) in the air
Detection principle	Electrochemical principle, thermal conductivity principle and infrared principle are optional;
Measuring range	0-50ppm, 0-100ppm, 0-500ppm, 0-2000ppm, 0-5000ppm, 0-100mg/L (0-100g/m³), 0-200mg/L (0-200g/m³) optional
resolution	0.01ppm (0-100ppm); 0.1ppm (0-1000ppm); 1ppm (1000ppm or more); 0.1mg/L, 1mg/L
Sampling method	①Free diffusion—on-line continuous detection, free diffusion detection method;
Sampling method	②Suction type—external air pump can be equipped with a flow-through adapter for air in and out or a built-in air pump to realize the pump-suction detection method (air pump is optional)
installation method	Wall-mounted type; pipe type (sub-holding type, intubation type, pipe type external thread: M45X1.5mm, optional pipe adapter screw joint, can be welded);
Indication error	≤±3% FS (higher accuracy requirements based on sensor performance)
repeatability	≤±1%
zero drift	≤±1% (FS/year)
Response time	≤20 seconds (T90), (higher requirements based on sensor performance)
Recovery Time	≤30 seconds (higher requirements based on sensor performance)
Power supply	12～30VDC
Power	≤2.5W（DC24V）
Environmental pressure	86kPa～106kPa
ambient temperature	-20°C～+55°C (typical value) -40°C～+70°C (limit value) (Higher temperature and humidity detection environment can choose our pre-treatment gas monitoring system)
environment humidity	10%～95%RH (no condensation)
The main material	①Shell: ADC12 aluminum alloy, Teflon paint, wear-resistant and corrosion-resistant (316 stainless steel shell is optional for complex and harsh environments) ②Gas chamber: high-strength wear-resistant and corrosion-resistant aluminum profiles, durable (optional for complex and harsh environments With 316 stainless steel air chamber), the outer thread of the air chamber is M45*1.5;
output signal	① Three-wire 4-20mA current signal output, which can be connected to various alarm controllers, PLC, DCS and other control systems; ② RS-485 digital signal output, connected to RS232 adapter card to view and store data on the computer; ③ 2 sets of relays High and low section alarm switch output: passive contact, capacity 30V 1A, 125VAC 0.5A; ④Voltage signal output: 0-5V, 0-10V signal output can be set by yourself (optional);
Signal transmission method	① Three-core (four-core) shielded cable transmission: the farthest transmission distance is 1000 meters to 2000 meters (single core 1 square shielded cable) ; Network long-distance real-time transmission (optional); ③ Optical fiber transmission: the longest transmission can be 20 kilometers to 40 kilometers (optical cable single-mode multi-core transmission, must be equipped with optical fiber MODEM), can be networked (optional); ④ Short distance RTU433 wireless transmission: the transmission distance is 0 to 2 kilometers, depending on the transmission power and the site environment (optional); optional);
Alarm method	Sound and light alarm, optional sound and light alarm, alarm sound: < 90 decibels
Alarm point setting	A1 alarm value, A2 alarm value; TWA alarm value, STEL alarm value can be set separately
display screen	2.3 inch TFT large color screen
button mode	Remote control + four-button operation
direct reading	Measured value, maximum value, minimum value
data record	Automatically store data, the storage interval can be customized, and can continuously store 300,000 sets of data with date and time, and can store more than 10 million sets of data with optional TF memory card;
data download	Support RS485 serial port measurement data download
calibration	Target point calibration function from level 2 to level 4 or above, calibration calibration value can be set, one-key zero adjustment
Explosion-proof electrical connection thread	① NPT3/4 to internal thread (optional 1/2NPT, G3/4, G1/2 to internal thread) ② Explosion-proof cable stuffing box (optional, explosion-proof certification);
Explosion-proof mark	Ex d II CT6 Gb (National Explosion-proof Electrical Products Quality Supervision and Inspection Center Inspection and Certification)
degree of protection	IP65
operating mode	Two operating modes, user mode and administrator mode, are available
size	210mm high x 175mm wide x 85mm thick
weight	About 1.8Kg (aluminum alloy shell)
Executive standard	GB15322.1-2003, GB3836.1-2010, GB3836.2-2010, GB3836.4-2010
quality assurance	One year warranty period, free maintenance during the warranty period.

Organic compounds

Product Overview：